RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#11)
Finnster
KillaHurtz
 
Finnster's Avatar
 
Offline
Posts: 2,958
Join Date: Apr 2006
Location: Bucks Co, PA
10.24.2007, 12:09 PM

Quote:
Originally Posted by nl12 View Post
Not many people run 10s+ because there is no ideal equipment to support it, like low kv 1515 motors, a proper controler, a truck that can easily hold 10s-15s lipo, also charging a 10-15s pack in a short time would require more charging equipment than most people have. I would like to run HV again but I will probably stick to 5s-6s unless there is a HV car controler built here in the USA so I can get fast service if it blows.
Kinda...

Above 10s is gets hard, but I already had a TP 1010C charger, which can go upto 10S. The hyperion 1210 w/ the LBA10 balancers is also capable, and many people have these as well.

w/ the TP you have to get the more expensive 210v balancer instead of the 205 (for 5S.) If you get the hyperion, get the 2 LBA balancer combo. BPP has it for $220 shipped IIRC. The astro 109 can do 8S too I think.

W/ Hv you use lower MAh batts, so amp rate is lower. The 1010C can do 5S @10A or 10S@ 5A. Its the same. If you had a 10S 2100 or 3200 setup, that's still a 2.4C or 1.5C rate anyway.

I think above 10S is the point of dimishing returns in car apps anyway. The 1515s go down to 1100 kv like I have, tho I could have easily ran the 3D (1360 kv) on my setup and been fine. The 2Y is rated for upto 50V and 3D to 45V.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com