Hacker Maxx Build

[sikeston34m]

Wow Linc! Yes Pictures please!

Ladies and Gentlemen. Can we please take up a collection for Linc a Video Camera? He spent all his money on RC.

[snellemin]

I run them in my all purpose rustler. Soon I'll stick them in my prostock dragsters. I run the 12T 3500kv and 8L 3750kv hackers.

[lincpimp]

Originally Posted by sikeston34m

Wow Linc! Yes Pictures please!

Ladies and Gentlemen. Can we please take up a collection for Linc a Video Camera? He spent all his money on RC.

If I had a vid camera I would shoot some footage of all of my rc stuff. I think everyone would really wonder about me then. To put it another way, I put all of my various brushless motors in a box. It weighs about 10 lbs now. I also have a 600 sq/ft room dedicated to rc.

Pics will be up tomorrow, looks just like a new emaxx with a purple finned motor and a quark 125. Now my use of a lsp body may be a first? I picked up a few of those bodies for 12 bucks a piece, so they will be on alot of my trucks.

It is funny, I own an auto paint and body shop and I have custom painted dozens of cars. And I do not care about painting rc bodies. I even try to buy prepainted bodies if the price is right. Kind of funny and ironic!

[lincpimp]

Snellemin, the rustler looks good, and I am sure those c40 motors kick azz too! They look like the best size (power to weight) motor for a lighter 2wd vehicle.

[sikeston34m]

Ummmm...........Where did you get the 48 tooth Mod 1 spur?

[lincpimp]

Hey Sike, figured you might ask that question.

Here is the selection of MGT spur gears: Mod1 spurs

All you have to do is slightly drill out the center hole to fit the traxxas slipper bearing, and drill out 3 of the small holes to fit over the bolt bosses on the slipper hub. It is wise to use small washers on the 3 allen head screws that hold the gear on. I will snap a pic of the gear when I swap the 52t in.

I have given up on 32p for the larger vehicles, mod1 is so much more forgiving than 32p.

[sikeston34m]

Originally Posted by lincpimp

Hey Sike, figured you might ask that question.

Here is the selection of MGT spur gears: Mod1 spurs

All you have to do is slightly drill out the center hole to fit the traxxas slipper bearing, and drill out 3 of the small holes to fit over the bolt bosses on the slipper hub. It is wise to use small washers on the 3 allen head screws that hold the gear on. I will snap a pic of the gear when I swap the 52t in.

I have given up on 32p for the larger vehicles, mod1 is so much more forgiving than 32p.

Thanks for the info!

I'm with you on the 32p gears. I've ran several packs through this E maxx with the mod 1 gears. Running hard, and they show NO WEAR.

If these were 32p gears, no telling what they would look like.

I've never had any luck pushing any kind of real power level through 32p gears.

[lincpimp]

32p is good for pedes and other 2wd trucks.

That is about it.

I really want to go back to the shop and play with the emaxx! I will charge the lipos again and see how much they take. I ran it for about 15mins and it did not seem to be losing voltage at all.