Hacker Maxx Build

[snellemin]

Here's a link that shows alot off motors with their corresponding kV and resistance. The C series hackers are on there as well.

[lincpimp]

Changed the gearing to 20/52 and ran the truck for about 15min. Top speed was 42mph, leading me to belive the motor is a 14l, or possibly a 13l. The 14l has a kv of 1725, which works out to slightly over 42mph on Brian's calc.

Temps were good, after 15mins, batterys were 70f, esc, 90f and motor was 150f. Ambient was about 65f. I would like to gear down slightly, maybe a 19t pinion. But since I have an 18t pinion and a 50t spur, that should be perfect gearing for this setup.

I am very happy with the hacker motor, just bought 3 more used hackers and have my eye on a few more. And I won a new aveox for the xxx-cr and my sidewinder came in. So I have a bunch of testing to do!

And my 14xl came in for the savage build too. And the hv-tmaxx is gathering dust. And the tekno clutch adapter came in for the yusa on road car. Plus my old emaxx needs some battery tray work to fit the new 5s lipos. And the terror needs motor mount reinforcements too. And the slipperential revo needs artur's stage 1 modded MM put in and tested. Plus the stampede needs the hacker 12s installed and tested. And I have a kontronik twist 37 coming for my thundertech chassis pede. And my tt01 top speed car needs the hacker 5s put in it. And I bought a b40 hacker for my m03 tamiya fwd to go with the quark33 on 4s lipo. Plus the direct to diff redcat could do with a battery tray and chassis reorganization too. And I am sure that I am forgetting something. Oh yeah, the 55" gas boat needs hull work, rigging and a custom paint job. And the battery trays in the sv27 need to be updated for the new lipos. Plus the hyper7 needs to be started, 9s lipo on an aveox 1300kv. I need help.

[sikeston34m]

Wanna hire me to work on your RC's?

That setup looks great Linc. I love how those Purple cans look.