Muggy diffs in a maxx

[its me]

Originally Posted by ANGRY-ALIEN

Hi its me... I am have a question for you... Do you think the Hot Bodies Lightning PRO will work well with the LST diff case?

http://www.rc-monster.com/proddetail...d=HPI_PRO_DIFF

I am currently prepping my e-maxx for brushless (feigao 8xl) and I concentrating on getting the driver train strengthened first... I am also on a very small budget ... So I am hoping this mod will help me.

Alien

Whats up man, as soon as I can find were my kids put my ruler ill measure the ring and pinion for you. Do you have the HB diffs already? If not a set of muggy or LST-2 diffs are really cheap on ebay.

[ANGRY-ALIEN]

Originally Posted by its me

Whats up man, as soon as I can find were my kids put my ruler ill measure the ring and pinion for you. Do you have the HB diffs already? If not a set of muggy or LST-2 diffs are really cheap on ebay.

Hi its me... I already have a pair of the HB diffs that I found on ebay ... So now I am looking for a way to house them in the bulkheads without spending a fortune.... Thanks for the help man.

alien.

[its me]

Originally Posted by ANGRY-ALIEN

Hi its me... I already have a pair of the HB diffs that I found on ebay ... So now I am looking for a way to house them in the bulkheads without spending a fortune.... Thanks for the help man.

alien.

For the ring gear I get a hair over 35MM for the 43T, im guessing aslong as the HB's are as small they should fit?

BP-do you think the 7Xl would heat up on me, im building this truck to play with and not just short bursts.

[lincpimp]

Personally a pair of 7xls will be overkill to play with. For all out speed you need power, to play you will most likely be happy with a combo that can put out 1.5 hp continuous. A pair of 15l feigaos on 5s lipo would be plenty of power (at least 2hp), and would run good temps as well. Battery cost and weight is a consideration, but a pair of 3000mah 5s 20c lipos would be plenty for that setup. A pair of quark 80 amps escs would be a good choice for that too. You are looking at a decent amount of cost, but I am sure that you would be happy with the result.

[its me]

Originally Posted by lincpimp

Personally a pair of 7xls will be overkill to play with. For all out speed you need power, to play you will most likely be happy with a combo that can put out 1.5 hp continuous. A pair of 15l feigaos on 5s lipo would be plenty of power (at least 2hp), and would run good temps as well. Battery cost and weight is a consideration, but a pair of 3000mah 5s 20c lipos would be plenty for that setup. A pair of quark 80 amps escs would be a good choice for that too. You are looking at a decent amount of cost, but I am sure that you would be happy with the result.

Project will be pieced together so cost is not to much of a concern, only thing I would like to stay away from is building a complete shelf queen. Let alone a maxx, years back ive spent enough money on maxx's to buy a nice used car I will never make that mistake again LOL!!! This truck is basically for me to play in the park with my kids, the neighbors tolerate the nitro's but I know they would appreciate the silence of a brushles.

Thanks for all the suggestions guys! I am really very much a noob to BL lol.
Oh almost forgot, ive read about heat issues with the 7XL I live in Hawaii so ambient air tems are pretty high all the time, im not sure if thats relevant or not?

[ANGRY-ALIEN]

Originally Posted by its me

For the ring gear I get a hair over 35MM for the 43T, im guessing aslong as the HB's are as small they should fit?

Thanks its me.... I will measure the ring gear later and if they are within spec, I will order the LST-2 cases I found on ebay...