Hyperion Charger

[gixxer]

Originally Posted by drivelosi

I will probly never go more than a 6s lipo so would the 0606i be a better choice for me and just add the new maxamps method balancer?

the 606i is limited to 50watts. you are going to want either the 1210i or 610i.

Originally Posted by gixxer

the 606i is limited to 50watts. you are going to want either the 1210i or 610i.

+1

Originally Posted by gixxer

the 606i is limited to 50watts. you are going to want either the 1210i or 610i.

+1 You will find due to the low output of the 0606i (50 Watts) you will only be able to charge a 6s pack at a max. of 2 amps = slow.
If you go for the 1210i (max. output 180W or 7.1 amps @ 6s) or the 0610i (max. output 250 W or 9.9 amps @ 6s) = fast charge.
I have the 0610i and luv it!!!
Check out this page HERE and have a go at Brians charger calculator.

Hope that helps
Cheers Andrew

P.S. Just be aware that you will need a good power supply to feed the later 2 chargers. Brian has also added a power supply calculator to the page I have linked be sure to check it out as well.