trimmed the slash for badlands.

[rootar]

Originally Posted by What's_nitro?

Umm... +1 +1 and +1! I think it looks fine. You'll just have more dirt to clean out when you're done!

I've got a WIP Slash right now. Waiting on wheels, tires, and a good 4s motor. Any recommendations? What are you running?

im running a 9L, mm w/ ccbec, and 5000 3s, MORE than enough power, no temp problems, and 45 minutes of runtime aint bad either. 4s might be alittle much in the slash....but im not one to talk about putting toomuch power into something, hell im running 1515 and 5s in a buggy


post some pics of how you guys trimmed your slashes! i know brad cut most of the fender that hangs down off his and then took a heatgun and flared the rest up and out to keep from cutting tires and also get the tires farther under the wheel wells.

[What's_nitro?]

Originally Posted by rootar

im running a 9L, mm w/ ccbec, and 5000 3s, MORE than enough power, no temp problems, and 45 minutes of runtime aint bad either. 4s might be alittle much in the slash....but im not one to talk about putting toomuch power into something, hell im running 1515 and 5s in a buggy

I picked up a Feigao 540S 16T (~2200kV) so that should do it. 22/90 gearing puts it around 40 mph, which is perfect for bashing.