Losi 8ight-t Diff

[starscream]

Ya,
Someone should sell a custom aluminum center diff adapter that will fit the Ofna 51T plastic spur... hint hint

I bet those would sell like hotcakes

[lincpimp]

Originally Posted by starscream

Ya,
Someone should sell a custom aluminum center diff adapter that will fit the Ofna 51T plastic spur... hint hint

I bet those would sell like hotcakes

Like the mugen plate? P/N ZMT-008. It fits the std diff cups and will allow the ofna 51t spur to bolt up.

[starscream]

Originally Posted by lincpimp

Like the mugen plate? P/N ZMT-008. It fits the std diff cups and will allow the ofna 51t spur to bolt up.

Almost... but not quite,

The mugen diff uses 5mm shafts so it won't fit the Losi8 diff properly unless you make your own 5mm shaft mod. This could be done but I'd rather use standard 6mm shafts.

Also, the ZMT-008 is getting pretty hard to find these days
I've got 3 of them

[lincpimp]

Originally Posted by starscream

Almost... but not quite,

The mugen diff uses 5mm shafts so it won't fit the Losi8 diff properly unless you make your own 5mm shaft mod. This could be done but I'd rather use standard 6mm shafts.

Also, the ZMT-008 is getting pretty hard to find these days
I've got 3 of them

I did not even think to look at the shaft... Oh well, we can't win them all...

[jayjay283]

The issue is the center diffs rear bearing. The rc-monster mount has a slight indented lip carved in it like the stock one for the flanged bearing to rest in, Rc product designs mount fits kyosho spurs (but not stock or RRP spurs) it has no lip and it places the center diff in or out (I cant remember) a mm or 2. If mike just didnt make that lip you could use the kyosho spurs, but not the stockers, wont work both ways. Maybe offer 2 mounts ? ( I had both mounts)