Rip Mmm

[RBMike]

No, I refuse to run an external bec when I paid for the one in the ESC to work. It's bad enough that we have to deal with the BS mechanical design on the fan and it's wire/ connector issues. I'm not running a crazy set-up or putting an unusual load on the anything. I'm running an Hitek 985MG steering servo and as Spectrum 3100 rx.

[tc3_racer_001]

did you know they are now installing foam under the board... guess they must be listening :)

opened it up and was suprised how small it is, to fit all that stuff in the little board then make a gigantic case for it all. took off the bottom sticker so i can actually stick it to my mount, seems dumb to stick it on the bottom but o well.

[e-mike]

right for the foam..... i remove this foam after my second failure(my esc failed once and restart after power on)my esc failed second time and i open the case....i was tinking that the foam was my problem(maybe causing heat of the bec whatever.....)but...my v2 failed third time after 3 min....nothing to do...simply died