Medusa Afterburner V2 BL motors

[suicideneil]

I would say define hot, but given the great numbers I doubt its anything to worry about much. If you havent got one already, pick up a cheap IR temp gun to see how your set up does after a run- no higher than 180*F for the motor, and ~120-130*F for the lipos.

[JesseV]

Originally Posted by George16

What's the timing set at on your ESC?

I'll check tomorrow, but it was low. Also some punch control if i remember right.

Originally Posted by suicideneil

I would say define hot, but given the great numbers I doubt its anything to worry about much. If you havent got one already, pick up a cheap IR temp gun to see how your set up does after a run- no higher than 180*F for the motor, and ~120-130*F for the lipos.

Yeah I have IR temp gun that I of course left home when I went to the track. :\ I'd say no hotter than 35-40C, which would be 95-104F, talking about motor.

I have the tekno rc motor mount with a fan on it. Outside theres no need for then fan since there's -11C (12F). But on the track its good to have.