losi 8ight with losi esc and 1700kw

[auto2]

update:

i updated the firmware and the cogging is almost all but gone. yea! unfortunatlly most of the settings are gone too. like initial acceleration is now set on high with no adjustments. also motor timing is either normal or high.
also in reverse when you let off it puts the brakes on.

[samwong]

Originally Posted by auto2

update:

i updated the firmware and the cogging is almost all but gone. yea! unfortunatlly most of the settings are gone too. like initial acceleration is now set on high with no adjustments. also motor timing is either normal or high.
also in reverse when you let off it puts the brakes on.

I also just updated the firmware to the latest version F.010120, but when reverse, once let off .... it puts the brakes on.... very bad on the transmission.......as it comes in a very sudden manner....

I want to change it back to the original F.010115 version, how can I do that....as there is no such version in their web, neither in the CD

[lincpimp]

Did you guys recalibrate your radios to the esc after the update? Zero all of your settings on the throttle channel, recalibrate and see if that helps...

[samwong]

Originally Posted by lincpimp

Did you guys recalibrate your radios to the esc after the update? Zero all of your settings on the throttle channel, recalibrate and see if that helps...

Let me try it now....

if it is the case... then Losi...... ah....

[samwong]

have another effort.... but the result is...

after reinstall Version 2 software, and import F010120 , setup/Calibration to Transmitter, i.e. Full Throttle to Green light solid, Full Brake to Red Light solid, Neutral Position, but blue light only flash a while then no light anymore...

Test again... forward ->ok , brake -> , reverse -> heavy brake follows after each reverse, which shake the motor and whole transmission.......This is a big problem.....

How Losi design the software???? Totally a mess.........