5th scale savage project

Yet ANOTHER Savage project? I see you are using those f/r assemblies. Does that mean you are forgetting the first extended Savage?

As far as the esc --- plane esc? wish i could be more help Linc. especially after you helped me with my Savage so much. There was that one i was talking to you about. The 12s capable 100HV. On hobbycity.

Pictures ASAP, should be a sweet build.

[lincpimp]

Originally Posted by Always Dreamin

Yet ANOTHER Savage project? I see you are using those f/r assemblies. Does that mean you are forgetting the first extended Savage?

As far as the esc --- plane esc? wish i could be more help Linc. especially after you helped me with my Savage so much. There was that one i was talking to you about. The 12s capable 100HV. On hobbycity.

Pictures ASAP, should be a sweet build.

I have more than 1 savage... Much like everything else I have!

I am a bit sceptical of a air esc, I do not think the burst rating will be enough. I went with a dual motor setup in the baja 5b conversion mainly because of this.

Hopefully Luciano will chime in with some sort of gangsta esc he had made...

[lincpimp]

Plugged some info into the calc:

Differential Ratio: 3.3076923076923075
Transmission Ratio: 2.215277777777778
Spur Tooth Count: 47
Pinion Tooth Count: 25
Total Voltage: 44.4
Motor KV: 625
Tire Diameter (inches): 6.5
Spur/Pinion Ratio: 1.88 : 1
Total Ratio: 13.77562 : 1
Tire Circumference (inches): 20.42 inches (518.68 mm)
Total Motor Speed: 27750 RPM
Vehicle Speed: 38.95 mph (62.57 km/h)