Jammin SCRT10 - RC-Monster Forums

phatmonk · 12.19.2009, 02:22 PM

Is the chassis plate from the original nitro CRT.5?

Shark413 · 12.20.2009, 04:19 AM

Quote:

Originally Posted by phatmonk

Is the chassis plate from the original nitro CRT.5?

It looks like a stretched CRT.5 chassis. Has the mounting holes in the chassis for the nitro parts (not used).

Shark413 · **Update -** 12.20.2009, 04:20 AM

Finished the body, just a super fast rattle can job, I normally use faskolor but that paint takes weeks to cure and I wanted the body dry so I could get it out on the track tomorrow. I installed the battery tray, motor, esc and tested it on the work bench. One thing I did notice was the stock tires are pretty hard (compound) and much smaller than what others are running. See the picture where I compare the stockers to some Pro-line bow ties for an Associated SC10.

Quickie paint job

Battery tray that fits 3s lipo

Neu 1509 motor and Mamba Max esc

Stock tires and pro-line bow ties (Associated sc10) the Bow tires look wider than normal because there not mounted, but you can see how much taller (larger diameter) they are.