Making a LST2 into a Truggy

[jpoprock]

COOL!! Yes, there is a slight difference, but it shouldn't have been shockingly so.

[JThiessen]

Is there any difference between a XXL chassis and an LST other than the length? Looks like I'm going to end up making my own chassis plates so I can fit the E-Maxx tranny in there in the right spot.

[lincpimp]

Originally Posted by Bondonutz

NOT argueing or anything but,
I put the Muggy shock bodies next to my aluminum LST shocks and the Muggy bods are 1/4" shorter.

Strange, I broke a muggy shock body and use a aftershock shock body to replace it. I will have to look and see if one is longer than the other... I will break out the calipers and report back, I have a few different lst shocks hanging around.

[Bondonutz]

Originally Posted by JThiessen

Is there any difference between a XXL chassis and an LST other than the length? Looks like I'm going to end up making my own chassis plates so I can fit the E-Maxx tranny in there in the right spot.

None that I see, it's stretched 0.5 in front of the trans and 0.5 behind. The rest looks the same.

Linc, when I say 1/4" thats just eye balling a Muggy body holding next to a LST shock fully dressed with spring etc. (Looks like a 1/4", could be less)
And the package does have a different part # specifially saying Muggy on label also.