 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
I'm obsessed with The Office
Offline
Posts: 908
Join Date: Feb 2008
|
08.12.2010, 08:16 AM
i had these same issues after doing some hard bashing. my conclusion was the shock of the landing was causing the esc cases to flex into the boards causing a break in some of the internals. i went through 3-4 escs that way.
my solution was to make an esc mount that was fixed to the chassis that also had a ledge that didn't touch it either. that way, if i had a hard landing, it could flex several inches and never touch anything that was taking the shock of the landing. you can make one for about 5 dollars out of anything that is rigid. i used aluminum. here's my quick drawing of it....it seems to work extremely well as there have been no more esc issues at all. PROFILE: 
8IGHT-T 2.0 2350KV MONSTER MAMBA LOSI TEN SCTE NOVAK 3700 MMP B44 MMP TRINITY D3 6T B4 MMP TRINITY D3 9.5 E-REVO BRUSHLESS EDITION |
|
|
|
 |
 |
 |
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
