Cen Genesis,Nemesis and GST 7.7 Brushless Conversion Kits

Originally Posted by Bmr4life

Boring head with a set of boring bars.

http://ttv.mit.edu/tags/331-to/video...machine-shop-7

A boring head is about $60 and a set of bars is $20 or so.

This is usually used on a mill, but can also be used on a drill press. With this, you could use just one piece of aluminum since you can control the dept of the hole. This is what I plan on using.

Will do that.

By the way, do you know of some metal cutting/types of metal tutorials? A tutorial on metal or something. Basically I would like to know more about how to work with metal, and cheap tools (Tools not ranging in the 10.000$++ range.)

[Bmr4life]

Originally Posted by Dj_Sparky

Will do that.

By the way, do you know of some metal cutting/types of metal tutorials? A tutorial on metal or something. Basically I would like to know more about how to work with metal, and cheap tools (Tools not ranging in the 10.000$++ range.)

That MIT video series is very good for that. Takes a few hours to get through all of them. As for tool, I just ask a lot of questions at the metal working forums. CNCzone is one I've been spending a lot of time lately.