2280, E-Maxx.. Any helpful Advice?

[coolhandcountry]

Originally Posted by BrianG

Just do a standard-to-metric conversion. There are 25.4mm per inch. So, 0.8mm=0.03149in, or 31.49 pitch. Likewise, 1.0mm=0.03937in, or 39.37 pitch.

Nothing personal brian. But that is not right. According to that it would have finner teeth. Squee has it right. Or close enough to right.
Remember the higher the pitch number the smaller and finner the teeth.

[BrianG]

Originally Posted by coolhandcountry

Nothing personal brian. But that is not right. According to that it would have finner teeth. Squee has it right. Or close enough to right.
Remember the higher the pitch number the smaller and finner the teeth.

Arrg. Sorry about that. I mixed up the dividing. :dft001:

pitch = 25.4 / metric
metric = 25.4 / pitch

So

0.8m=31.75p
1m=25.4p
.53m=48p