When for monster maxx?

[BrianG]

I still think they should've at least made it 6s capable. Many people use layouts that have a battery pack on both sides (emaxx, buggies, truggies, etc) and it's nice to keep the weight balanced. Granted, the MM will probably be able to go to 6s, but won't be advertised as such. There must be a big price difference between low voltage FETs and higher ones since there are few high V ESCs and the ones that do exist are pricey.

[crazyjr]

Originally Posted by BrianG

I still think they should've at least made it 6s capable. Many people use layouts that have a battery pack on both sides (emaxx, buggies, truggies, etc) and it's nice to keep the weight balanced. Granted, the MM will probably be able to go to 6s, but won't be advertised as such. There must be a big price difference between low voltage FETs and higher ones since there are few high V ESCs and the ones that do exist are pricey.

Metal said it was because of braking causing high spikes, I think the price for high enough fets and caps might have killed the budget aspect of the ideas the mamba packages were founded on. I hope the HV has all the good points on the mamba series, but the HV that everyone wants. The more i see on the MMM the more i like it, I hope the link gets better though

[neweuser]

Originally Posted by crazyjr

Metal said it was because of braking causing high spikes, I think the price for high enough fets and caps might have killed the budget aspect of the ideas the mamba packages were founded on. I hope the HV has all the good points on the mamba series, but the HV that everyone wants. The more i see on the MMM the more i like it, I hope the link gets better though

I personally have never used the CC link, but then again, i only have the mm 25....
Other than that, with all the issues i have heard about the link I would hope they cure this problem.....MMM should be great, i just fear that it will take longer than anticipated....

[crazyjr]

Originally Posted by neweuser

I personally have never used the CC link, but then again, i only have the mm 25....
Other than that, with all the issues i have heard about the link I would hope they cure this problem.....MMM should be great, i just fear that it will take longer than anticipated....

Its not the mamba 25 or any other esc in castles lineup, all the forum threads and problems i have seen are with the mamba max, which strangely is the only one with a usb jack and not plugged into the reciever wire

I would believe the problem with the driver in the esc if the esc never worked on the computer, the newest one did just that, but run once before losing neutral, but the oldest one had been programmed several times in the n=early year i had it till V2.23

As I have said before to all new people, I love the mamba max system, I'm just concerned about the programon the computer