Some Question from a BL noob

[Procharged5.0]

chumanji,

welcome to the RC-Monster forums!

The Mamba Max seems to respond well up to 14v reliably. Some have successfully run as high as 20v (5s fresh off the charger)

I run 12 NiMh and have a set of 8cell NiMh's (would be 16-cells total) but have not tried them yet.

The biggest issue is keeping the ESC cool. Put a fan on it, use a UBEC, and use an efficient motor that keeps the amp draw down.

Thanks all for the answer. Wish I found this forum earlier...:027:

I saw the wiring diagram for the UBEC. Do i need to disable the BEC within the Mamba controller? Or would I just connect the sigal wiring to the receiver and leave out the + and - wire.

And wat size Pinion are you guys using for 8XL?