Question about 1717 and "Neu" licensing

[jas21373]

Originally Posted by Semi Pro

there is the problem, i cant gear up 63/26 is the best i have found

losi makes a 59 tooth spur but the motor cant get close enuf to mesh right (it hits the transmission) and i havent found a place that makes over 26T pinions in 6mm

I brought a custom made 30t from Dan ,it was 5mm thou ,he must be able to do them in 6mm ,you would think. http://kershawdesigns.com/

[lincpimp]

Originally Posted by Semi Pro

there is the problem, i cant gear up 63/26 is the best i have found

losi makes a 59 tooth spur but the motor cant get close enuf to mesh right (it hits the transmission) and i havent found a place that makes over 26T pinions in 6mm

You can get the tdr colleted pinion adapter with a 6mm collet and then get a 25-30t pinion gear from rcm. Use that with the 59t spur and you will have plenty of gearing options.

[TexasSP]

Straight from the lips of El Jeffe!