Technical support for HOBBYWING products - Page 2 - RC-Monster Forums

superek4 · 03:18 AM

Err bro I started this thread to help ppl not bash ppl up. I m sorry if u felt offenced but that's not wat I meant.

N I din say I dun like kd motor. Cool man.

bumsnogger · **esc won't programme -** 05.12.2010, 10:30 AM

Hi,My programme box won't work.I've tried rigging it up with a battery pack as well as the esc wire,(It didn't work before I did this)

.I've emailed them several times,they won't reply! I'm gonna have to get the better buisness bureau involved.

Could you give me an email address they'll respond to? Thanks in advance,

bumsnogger · **KD= Kershaw design? -** 05.12.2010, 10:38 AM

Hi.I had the kershaws revolver in my summit.It thermalled the esc,burst batteries,then when I went to single motor with reccomended pinion,it CAUGHT FIRE!!!!.Won't be buying from them again!!!

bumsnogger · **hobbywing 5200kv link? -** 05.31.2010, 08:52 AM

Hi guys.I saw someone put up a link on how to set the esc without a programming card.Any ideas where,or can you provide the link? It's gonna cost me $30 in postage for the new card to get to the UK. The whole lot was only £38! thanks in advance

06.19.2010, 07:44 AM

Hi just purchased a XeRun 4274SL with 2 in 1 professional program box. Ive been trying to change a few settings but I cant get them to save to the ESC. Also tried to change settings using the USB port but still no luck. Any ideas?

superek4 · 06.19.2010, 08:28 AM

Quote:

Originally Posted by jasenrobbo

Hi just purchased a XeRun 4274SL with 2 in 1 professional program box. Ive been trying to change a few settings but I cant get them to save to the ESC. Also tried to change settings using the USB port but still no luck. Any ideas?

can u tell me how u save the settings? u must press ok( the 4th button on the LCD card.

did u plug the esc plug into the LCD Card & PC? u can save the setting by pc too.

if all dosnt work try updating the software of the LCD & esc first.

06.19.2010, 06:30 PM

thanks for your help superek4. Ive updated to the 1.62 software and all seems to be working now. ?? When you press the ok button to save the setting, should the * move to the new setting or does it move to the default setting.

superek4 · 05.12.2010, 11:28 AM

Bro email hobbywing zj@hobbywing.com

if he doesn't response let me know I will email him. Most prob your esc has gone crazy.

Arct1k · 05.13.2010, 07:31 AM

Please try to keep this thread clean... I took this thread as a team driver trying to provide support for his teams products...

Its a bit obvious that he's going to be supporting his teams products... So with that in mind I'd just be grateful and hope he can help get anyone fixed up with any issues they have...

All the best...

superek4 · 05.13.2010, 07:40 AM

Quote:

Originally Posted by Arct1k

Please try to keep this thread clean... I took this thread as a team driver trying to provide support for his teams products...

Its a bit obvious that he's going to be supporting his teams products... So with that in mind I'd just be grateful and hope he can help get anyone fixed up with any issues they have...

All the best...

Thx mod.

bumsnogger · **I got a reply! -** 05.13.2010, 09:41 AM

Hi guys,I got a reply from hobbywing

. I had to mention trading standards

. Thanks for the email address

. I don't understand whats happened to the prog card,It's kept in the foam box, If I can get a programme card it should work? I'm a newby to electrics,so don't understand it yet.I'm colourblind so didn't learn anything about electronics,or colours

. Any help is really appreciated!

superek4 · 05.13.2010, 10:28 AM

Quote:

Originally Posted by bumsnogger

Hi guys,I got a reply from hobbywing

. I had to mention trading standards

. Thanks for the email address

. I don't understand whats happened to the prog card,It's kept in the foam box, If I can get a programme card it should work? I'm a newby to electrics,so don't understand it yet.I'm colourblind so didn't learn anything about electronics,or colours

. Any help is really appreciated!

you can try getting a program card before sending it over. its ok i m here to help.

n yes the cheap card do spoil.

superek4 · 06.19.2010, 07:24 PM

U can save it via pc too.

06.19.2010, 07:35 PM

Yep Ive tried changing it via the PC software connected to the USB port and the ESC. Ive tried changing it by using the Hobbywing professional program box connected to the ESC and I just tried it with a Hobbywing program box(old analogue style) connected to the ESC. No matter what I do I cant get it to * the setting Im after. Trying to set the battery to S4 instead of auto detect and have been pressing the ok button each time.

superek4 · 06.19.2010, 08:07 PM

Via pc can save or default hv u tried? No need to press ok with LCD program card.