Direct Drive to Diff E Revo Build

[sikeston34m]

At first I'm going to play around with 6S2P A123. Although I'll probably be doing some testing on different Lipo configurations too.

I'm thinking the 6S2P A123 will take me to about 40mph with some insane acceleration. Gonna start the play sessions with the Quark 80B ESC, but this baby needs some HV!!!!

I've been looking at the Kontronik Jazz 55-10-32. Then I could run 2 packs of 5 Series Lipo's. Maybe the 5000mah versions for a 10 Series setup.

On HV, maybe the best thing to do would be to get the RCM buggy diffs. Get both the 4:1 AND the 4.3:1 ratio's. The motor would be spinning so much faster on 10 Series, I could trade some top end for more acceleration.

I'm gonna test it first on the lower voltage. All that HV stuff means shelling out some bucks. I wanna do a little more research on the HV ESC's first. I would love a Car ESC with reverse that will do 10 Series and get along with outrunners.

I think I have alot of power here. Some testing is in order to find the perfect balance of acceleration and top end.

It just about got away from me when I was running it. Now I look like I have a serious rug burn on my arm! LOL