Help with a Plettenberg please!

[sikeston34m]

Ok, before you do anything else, check those connectors out really good.

I was having cogging issues just like this with a Mamba Max setup. Come to find out, it was arcing inside one of the connectors. I replaced all 3 connectors and it was fixed!

It was on the male side of the connector. I noticed one would slide in.........or unplug very easily. When I looked at it closer, I could see little burnt spots where it had been arcing.

Before I fixed it, it would run the motor. There was alot of cogging though until finally the ESC would thermal.

It's running strong now. Check it out.