200A, 14S lipos ESC to come!!!

[BL_RV0]

what i think would be cool is
one of these
http://www.atomicmods.com/Products/E...FRpdagodVmMrXg

your esc, lutach.

2 of these
http://b-p-p.com/proddetail.php?prod=j_%23TP2000_11.1

and this (maybe, 6s might burn it up, but for $19, who cares )
http://www.hobbycity.com/hobbycity/s...idProduct=5379

[lutach]

Originally Posted by BL_RV0

what i think would be cool is
one of these
http://www.atomicmods.com/Products/E...FRpdagodVmMrXg

your esc, lutach.

2 of these
http://b-p-p.com/proddetail.php?prod=j_%23TP2000_11.1

and this (maybe, 6s might burn it up, but for $19, who cares )
http://www.hobbycity.com/hobbycity/s...idProduct=5379

I have the Align 430L that I want to try with around 4S. I love that Atomic conversion.

[magudaman]

I noticed earlier you mentioned HV for electric vehicle stuff. That is an additional market you guys could grab if you went over 12s. I currently run 25s 4p A123 cells but only at 25 amps on a bike. Some other guys online are running 30s with around 80 amps. Everyones major complaint in that community is the lack of high current brushless controllers. So put something out. The popular FET in that community is IRFB4110 100v 180a peak. I love my RC but would love to have some more power so I could basically ride my RC.

[lutach]

Originally Posted by magudaman

I noticed earlier you mentioned HV for electric vehicle stuff. That is an additional market you guys could grab if you went over 12s. I currently run 25s 4p A123 cells but only at 25 amps on a bike. Some other guys online are running 30s with around 80 amps. Everyones major complaint in that community is the lack of high current brushless controllers. So put something out. The popular FET in that community is IRFB4110 100v 180a peak. I love my RC but would love to have some more power so I could basically ride my RC.

I received a mail from the guy who is doing my HV controller and he said he will work on the software after the next year. He also mentioned it is easier to make a 80 or 100 volt unit. I'm still waiting for him to give me a solid answer on that. I know of a company that makes controllers for e-bikes and I think they have 2 motors, one is 5000W and the other is 10000W. Here is the specs on the controller:

Power Voltage Supply: 48V-60V DC
Drivable Motor Power: 1500W-10KW
Max. drive Current: 75A-300A

Here is the specs on one of the motor designs:

Rated voltage: DC48V-72V
Rated power: 10000W
Rated rotating speed: 1000rpm-2600rpm
Rated efficiency: Greater than and equal to 90%
Applied for electric bicycles, tricycles, electric ATV and four wheeler vehicles
Stator Diameter: 160mm

[nieles]

Originally Posted by magudaman

I noticed earlier you mentioned HV for electric vehicle stuff. That is an additional market you guys could grab if you went over 12s. I currently run 25s 4p A123 cells but only at 25 amps on a bike. Some other guys online are running 30s with around 80 amps. Everyones major complaint in that community is the lack of high current brushless controllers. So put something out. The popular FET in that community is IRFB4110 100v 180a peak. I love my RC but would love to have some more power so I could basically ride my RC.

maybe it is a bit off topic but could you post some pic's from your bike?