My baja 5E....sort of

[BL_RV0]

id suggest the 100a turnigy, but you need motor brakes.... wny not some rear discs on the wheels? itll handle 12s. get a pair of 6s. and a series connector... and a kb45xl....

[t-maxxracer32]

he already has 12s.

but i suggest going with a higher voltage also instead of lower voltage higher kv rating.

you could always put the 9xl and 6s2p on there just for some fun.

but dont go out and buy them.

save it for something you will use for this project for a while.

[lydiasdad]

Sorry for the confusion. I have 16 a123 cells 4 3s1p packs and two 2s1p packs. So I can run 12s1p or 6s2p...etc. I am only running 6s2p because I don't have a controller to run a higher voltage. 12 cells, whether in 12s1p or 6s2p will have the same power output. I will just have to pull more amps to get the same power. I know thats not ideal, but it will work for now. I am really looking at the 55-10-32 kontronik. It has proportional brakes right?