My new home made center sliperential

[lincpimp]

It may be ok, I usually set my steel to steel gears slightly looser than stell to plastic. They seem to run smoother with a bit more slack, and are plenty strong.

Originally Posted by lincpimp

It may be ok, I usually set my steel to steel gears slightly looser than stell to plastic. They seem to run smoother with a bit more slack, and are plenty strong.

That's what i think, so i'll be try it.
But your idea of a 23T is not bad, i'll try to find a 23T just to test the mesh!

[lincpimp]

Hope it works well, let us know!