looks like novak has some new hv stuff

[lincpimp]

Originally Posted by lutach

I disabled the BEC. I did run the BEC with 3S and it did fine. I use the HV4.5 and I use it in sensored mode. The TC3 is not the RCP conversion, I bought it a long time ago and the person did a nice job on the conversion. Here are pictures of it before the HW controller, but with the HV4.5 in it. http://www.rc-monster.com/forum/show...49&postcount=6, http://www.rc-monster.com/forum/show...50&postcount=7 and http://www.rc-monster.com/forum/show...51&postcount=8.

Nice looking rc lutach. Was it hand made? I am guessing that you would rate the HW esc better than the novak. I may have to get one, as my mm in the crt.5 with the hv6.5 is not doing so well. Lots of stuttering from a standstill.

[lutach]

Originally Posted by lincpimp

Nice looking rc lutach. Was it hand made? I am guessing that you would rate the HW esc better than the novak. I may have to get one, as my mm in the crt.5 with the hv6.5 is not doing so well. Lots of stuttering from a standstill.

The person that made the conversion did a very nice job. The shock towers seems to be the only custom made part and the arms are from Losi and Associated. I like the HW very much. HW won't be selling the 120A or 60A here in the US, but you can get the Venum which is the same.