Choosing new motor and lipo.

[RC-Monster Mike]

I am here! I use the 1940/8 motor on 5S and 6s Lipo, using the Kokam cells you mentioned with no trouble at all. Even on 6s, the motor runs relatively cool and I could complete a 10 minute main with no trouble - I could go longer with these 3200s. On 18.5 volts(which is where I would limit myself with the Schulze controller), this motor is excellent and will provide plenty of cool running, smooth power. I have actually considered using a 19470/7 for 18.5 volts, but the 8 turn works perfect with 5s or 6s. I don't use a LVC device, either, though I agree ethat it is a good idea.