SH Z-Car ZMXB-8 1/8 Buggy - Perfect for conversion?

[lutach]

It looks awesome.

Edit: Try the following springs: http://www.amainhobbies.com/product_...ducts_id/12695. I have the one for the Hot Bodies LSP and they are awesome.

[tc3_racer_001]

hi there, nice job! could you please show me how you mounted your reciever/antenna mount thingy... this is something i need to work out! thanks,
ryan :)

[MetalMan]

Originally Posted by lutach

It looks awesome.

Edit: Try the following springs: http://www.amainhobbies.com/product_...ducts_id/12695. I have the one for the Hot Bodies LSP and they are awesome.

Any chance you can get the inner diameter at the top of the spring and at the bottom of the spring? The shocks on the SH buggy use springs with a larger innder diameter at top, and they taper to a smaller ID at bottom.

Originally Posted by tc3_racer_001

hi there, nice job! could you please show me how you mounted your reciever/antenna mount thingy... this is something i need to work out! thanks,
ryan :)

It is just a simple receiver mount:
http://www3.towerhobbies.com/cgi-bin...?&I=LX3355&P=7
This is my only Nomadio receiver, so there's velcro on the bottom of it, enabling me to quickly swap it between cars .

Thanks for the comments!

[lutach]

Originally Posted by MetalMan

Any chance you can get the inner diameter at the top of the spring and at the bottom of the spring? The shocks on the SH buggy use springs with a larger innder diameter at top, and they taper to a smaller ID at bottom.

You got me there . Give Amain a call or send them an e-mail with the diameters you have.