Cheap "high voltage" esc Quest

[lutach]

Originally Posted by timaneli

the modellfun store sell my my combo and tell me for use a 4s lipo on this motor i need a external bec.

what do you advise at external bec´s??

i am from portugal and i only buy on ebay until now..

regards

Bom dia. Eu nao uso BEC. Eu uso bateria de Rx. Todo os meus BEC nao foi suficiente para os servos que eu uso. E bom usar uma Rx pack ou External BEC se voce for usar mais de 3S lipo. Se voce nao tem espaco para uma Rx pack, ai voce precisa de um External BEC. Olha este thread http://www.rc-monster.com/forum/showthread.php?t=13133, tem muitas informacoes sobre BEC.

[Metallover]

Jeez, I looked at this thread and there is a.... spanish? conversation going on? I haven't read any more then the last couple pages of this thread and I though I should post if this hasent already been said:

http://www.hobby****city.com/hobbyci...idProduct=7341 take out the stars

It is an 100a esc that handles up to 8s lipo. It only costs 30 dollars too. I made a thread on it...

The company is called suppo and they make a 12s 200a controller... I don't know how you can get it. I think you can contact lightflightrc and they can hook you up.

[lutach]

Originally Posted by Metallover

Jeez, I looked at this thread and there is a.... spanish? conversation going on? I haven't read any more then the last couple pages of this thread and I though I should post if this hasent already been said:

http://www.hobby****city.com/hobbyci...idProduct=7341 take out the stars

It is an 100a esc that handles up to 8s lipo. It only costs 30 dollars too. I made a thread on it...

The company is called suppo and they make a 12s 200a controller... I don't know how you can get it. I think you can contact lightflightrc and they can hook you up.

It's Portuguese not Spanish. You can't get the 200A as I wanted to get one with a car software, but Suppo used sample boards that couldn't take the amp draw. Nobody will sell the 200A if it can't be built. I had to buy the MOSFETs and send them to Suppo.

[Metallover]

I could have sworn lightflightrc had one. I was trying to get the 125a I think and they said they had a 200a. I never knew the boards couldn't take the draw.

Sorry about the language messup. I don't know either language.

[lutach]

Originally Posted by Metallover

I could have sworn lightflightrc had one. I was trying to get the 125a I think and they said they had a 200a. I never knew the boards couldn't take the draw.

Sorry about the language messup. I don't know either language.

They don't. If they do and if you get one, they'll have my MOSFETs on them, but it's cool I got the NXP PHB160NQ08T for $0.45 and had Suppo pay $1.25 for all 800 pieces.

[suicideneil]

You total rip-off merchant...

[suicideneil]

Yet more contenders, from Bidproduct this time:

http://www.bidproduct.com/part/Produ...ESC%20_28.html

http://www.bidproduct.com/part/Produ...ESC%20_31.html

They both have proportional brakes (more or less) and reverse- requires the optional programming boxes ideally.

[lutach]

Originally Posted by suicideneil

Yet more contenders, from Bidproduct this time:

http://www.bidproduct.com/part/Produ...ESC%20_28.html

http://www.bidproduct.com/part/Produ...ESC%20_31.html

They both have proportional brakes (more or less) and reverse- requires the optional programming boxes ideally.

Those act more like airplane esc. I have the Etti boat esc and they are just like the airplane esc, but they work with pistol radio.

[suicideneil]

Bah, humbug. Would they be anygood as a cheap-ish option? I've had a few people ask me about them but I have no clue really.

[Metallover]

I think the Hobby City "Super Simple" (suppo) 100a one is the way to go. Only 30 dollars.

[suicideneil]

Price is right, but the other options posted have car/truck brakes and reverse, albeit on a plane/boat esc..