HV motor question

[NovakTwo]

Don't shoot the messenger!

After serious conferencing (ahem), I have learned that I "mis-typed".

Our motors are actually 2 pole, 3 slots.

As those of you who "know things" have already pointed out....

[NovakTwo]

Originally Posted by BrianG

Lutach, you knew pictures are a minimum requirement, yet you posted anyway. NovakTwo is probably a PR/marketing guy without the techy knowledge that some of us ask about. Who besides us would care how many poles it has? And who besides us would be able to explain why 3 is not the correct answer? Just try asking that at the T forums.

So true, so true.....

[BrianG]

That's ok, for that mistake, you just get 10 lashings with 30' of 12GA noodle wire (red so the blood doesn't show as much).

[lutach]

Originally Posted by NovakTwo

Don't shoot the messenger!

After serious conferencing (ahem), I have learned that I "mis-typed".

Our motors are actually 2 pole, 3 slots.

As those of you who "know things" have already pointed out....

Alright . NovakTwo, if I send you my burnt HV4.5 motor, can you ask your motor winder guy to make it a 1.5T? I have a 200A ESC coming soon and I want to use your motor to set a speed record for 2S lipos. I really don't want to send my motor to France to get it done.

[Semi Pro]

thanks novaktwo, i guess we all learned something today

[NovakTwo]

Originally Posted by Semi Pro

thanks novaktwo, i guess we all learned something today

Especially me....

[lutach]

NovakTwo,

Did you ask Bob if I could send my busted HV4.5 to get it rewound to 1.5T so I can do the Speed Runs on 2S lipos? If I get a record, I'll give Novak the credit for providing the HV motor.

[NovakTwo]

Originally Posted by lutach

NovakTwo,

Did you ask Bob if I could send my busted HV4.5 to get it rewound to 1.5T so I can do the Speed Runs on 2S lipos? If I get a record, I'll give Novak the credit for providing the HV motor.

We have made special motors for speed runs before. But we can't rewind your existing motor or swap it for a special wind HV. The special would be $100 plus shipping---@ same price as our other HV motors.

Bob is checking to see what we could do. I'll let you know. What esc are you planning to use?
-------

Bob said we could do 2.5 or 3.5 to be used with 2s lipos, only, and no warranty. Why not just use a Nue motor for a SL controller?

[lincpimp]

Originally Posted by lutach

NovakTwo knows we are here to help and cause trouble at the same time . Hey balme lincpimp for this .

Originally Posted by Semi Pro

thanks novaktwo, i guess we all learned something today

Yes, I learned that apparently everything that goes wrong on this forum is my fault

I guess someone has to be the scapegoat when Mike or Serum start pointing fingers. Everyone will just say that it was me, and since Mike and Serum are NOT dumb they will agree... Sucks for me

[lutach]

Originally Posted by NovakTwo

We have made special motors for speed runs before. But we can't rewind your motor or swap it for a special wind HV. The special would be $80 plus shipping---same price as our other motors. Bob is checking to see what we could do. I'll let you know.

Please let me know, I'll be more than glad to pay the $80, but some sort of sponsorship will work for me too, specially if I put another Novak motor on the record books .

[NovakTwo]

I edited my post above with Bob's comments and the HV motor price.

[lutach]

Originally Posted by NovakTwo

I edited my post above with Bob's comments and the HV motor price.

Why, what happened? I would still be interested though.

[NovakTwo]

Originally Posted by lutach

Why, what happened? I would still be interested though.

I originally quoted the Velocity/SS Pro price, not the HV.

Winding special motors requires a lot of hand-holding and testing.

[lutach]

Originally Posted by NovakTwo

I originally quoted the Velocity/SS Pro price, not the HV.

Winding special motors requires a lot of hand-holding and testing.

I can send you my HV and you can do all of that with it. How does that sound?

[Mister-T]

Originally Posted by lutach

Alright . NovakTwo, if I send you my burnt HV4.5 motor, can you ask your motor winder guy to make it a 1.5T? I have a 200A ESC coming soon and I want to use your motor to set a speed record for 2S lipos. I really don't want to send my motor to France to get it done.

Hu to france, I'm french so that make me curious. I know there is number of compagny doing rewinding motor but that for industrial stuff.

Or maybe you plan to send it to that guy (Team Petit'yo) that make custom BL motor out of stock motors ?