Quote:
Originally Posted by MTBikerTim
Any tips on how you did it and what you used as weights?
I have been wanting to do it but don't have and thing to stick to the wheels. It has to be removable too because I am using beadlocks too.
|
I used a airplane prop balancer, and the putty style 2 part epoxy. Seems like the epoxy would come off the wheel if necessary. I did not sand the wheel, and the plastic is smooth so it should come off with some elbow grease and a flat blade screwdriver.
Heres the thread with the info and pics of what I did, pics on the bottom of the page:
http://www.rc-monster.com/forum/show...t=14549&page=2
Threaded Mode
