Need response from a Castle tech for MMM question

[joeling]

Well, it's Saturday night & the weather has been kind to me. Went bashing at out local track for a couple of hours. I am happy to report that both escs survived my torture test. Ambient temperature was around 32 to 35 deg C with high humidity :


Car 1 - HN CR X1 1512 2600KV 4S 600mah PQ lipo gearing 13/48 (modded V1)





Started with this car first. Went round & round the track & had a few rounds with the nitro guys. About the 3 or 4th time they took a rest due to fuel depletion, I decided to stop to check check. Noticed that the fan was not running - it was jammed somewhere. This fan was powered off the UBEC. Esc was still running though & for how long without the fan not sure. So decided to stop for the day & fix up the fan later.


Car 2 - HN X2 Neu 1515 2000KV 5S 5000mah 13/48 gearing (modded V2)





I am really starting to like this car. Only the second run so far this time out. The first run ended with a busted Tekno Neu 1515 2200Kv motor. Thie time round, ran the car until LVC kicked in at 15.5V. Esc is unharmed.

This is the track layout :


Track left side


middle section


Track right side


Grandstand


The big triple at the far side

I will try for another run tomorrow if weather permits & I can convince my family I'll be home for the mooncake festival dinner.

Regards,
Joe Ling