Erevo / Emaxx 1/8 center diff

[lincpimp]

Originally Posted by torqeroll

thanks, its a 6 to 1 gear box i made for a giant size neu for a 102 inch giant aerobatic plane, swings a 31 x 18 custom prop

That is a BIG A$$ prop!!! I thought it was a gearbox of sorts! I am sure that plane is fun to fly.

[BL_RV0]

Wow...

[sjcrss]

Got my traxxas Cd in the mail, it appeasr to have a slight recess in the back side of the gear, where the diff cup attaches to, and the thing comes filled with 500k fluid....hopefully tomorrow my Ofna diff will come , and i can start diiassembling it all and get some pics up for everyone.....it looks promising so far.....but will find out soon enough

[neweuser]

Good, get to work slave! :)

[sjcrss]

i'll give you slave.....any time you want to get a good feel free to come on over Newe.....

[neweuser]

Heh, already been there, your turn to come here and drive 23 hours!!! LOL

[sjcrss]

allrighty then

[neweuser]

Originally Posted by sjcrss

allrighty then

So when you coming? I could use a truck to drive! LOL

[sjcrss]

nope....my turn to torture you......just roll your tires around the house and go VROOOM---VROOOOM.....
newe...

here is a pic if the instructions that were included with the diff...in case anyone wants to see it

[lincpimp]

Originally Posted by sjcrss

Got my traxxas Cd in the mail, it appeasr to have a slight recess in the back side of the gear, where the diff cup attaches to, and the thing comes filled with 500k fluid....hopefully tomorrow my Ofna diff will come , and i can start diiassembling it all and get some pics up for everyone.....it looks promising so far.....but will find out soon enough

I have a traxxas c/d coming too. We will see if the gear will provide a better platform than the stock lower gear. Can't wait to see your pics!

[sjcrss]

well I may be able to get some done tonight....but im off to dinner for now...so hopefully later.....what do you want to see from the traxxas CD

[sjcrss]

well, just a FYI, I have almost everything, still waiting on a few more parts...like my diff cup, that didn't come with the hyper diff, and a few small items.....I believe I have the rear part of the diff figured out ( the cup part) and presently the ring gear is getting drilled & tapped by a friend at work in the machine shop, and the only other thing I think that will needed to be modded is, cutting the stock outputshaft & drilling a hole to accept the pin that indexes the internal output gear, so so far it looks like it may be easy to do.....hopefully I can get pics this weekend...if everything comes.....I'll keep you all updated, as well. Pics to come.......