v2 on 6cell lipo who still alive??

[musaed]

yes you right
and the service of castel c its perfect
and if mmm v3 good i will buy two mmm v3 compo to change my rc nitro to
electric

[e-mike]

curiously on 4 units i have one v2 still running flawlesslyon 6 cell...

[killermmn]

a other one dead but whit a bec on it!!!

[VintageMA]

I have 2 working V1's on 6S with internal BEC, but popped my first V2 on 6S 10 seconds after first initialization.

I refuse to use an external BEC with the MMM!!!! Really - what's the point?

If I want to use and external BEC, and a fan mod, and a cap mod - well..... - I'll do what I did after my V2 popped...... Go back to my modded MM with fan and CCBEC.

If I buy a 6S ESC with an internal BEC I am going to use it just that way. I appreciate the time (and money) that CC has had to eat with the problem they are having and I know that eventually the product will be rock solid just the the MM is now.

Once the V3 comes out and has been proved to be a solid controller I am going to send in my popped V2 for replacement and then when I get that back I will send in my V1 controllers 1 at a time as well for an upgrade.

In the meantime I have picked up a MGM E-series 8025 6S sBEC controller that just came in the mail today - I hope to get it soldered and programmed to run this weekend. We'll see how this one goes.

[VintageMA]

Just as a follow-up to my previous post to maybe help all the MMM owners out there feel a little better.

I soldered the connectors and hooked up the MGM esc and powered it on. It did the initial programming okay and just like my MMM V2 on 6S I ran the wheels just a little bit and then two huge sparks came out of the ESC and then nothing.

Very disappointing as this ESC cost almost twice that of the MMM.

I'll be contacting MGM support over the weekend, but it'll probably take at least a month with sending it back and getting a replacement.