CRT Brusless converison

[What's_nitro?]

It can handle up to 1600 watts. I think that's enough (?).

[skellyo]

Originally Posted by What's_nitro?

It can handle up to 1600 watts. I think that's enough (?).

Should be. I don't have any experience with them myself. I'm just skeptical since just about no one uses the Align motors in BL conversions. If they were that good, you'd see more of them.

[What's_nitro?]

Originally Posted by skellyo

I'm just skeptical since just about no one uses the Align motors in BL conversions. If they were that good, you'd see more of them.

I currently have one in my Rustler on 4s and it flies. Not sure how it would fare in a larger vehicle.

I have a friend who wants to sell me a feigao 7xl 2382 brushless. Would this motor be much beter?

[skellyo]

Originally Posted by enzo78

I have a friend who wants to sell me a feigao 7xl 2382 brushless. Would this motor be much beter?

No. You'll end up with heat issues with the 7xl.

If you don't want to spend as much as a Neu costs, the Medusa that MetalMan recommended would do a great job in the CRT.

I'm running 1600kv Medusa on 5s with a 15t pinion my X2 CRT .

Heaps of torque for the track and out runs the nitros on the top end about 40mph , no heat issues at all .

[skellyo]

Originally Posted by skellyo

I'm just skeptical since just about no one uses the Align motors in BL conversions. If they were that good, you'd see more of them.

Originally Posted by What's_nitro?

I currently have one in my Rustler on 4s and it flies. Not sure how it would fare in a larger vehicle.

A rustler isn't even in the ballpark of the strain a 1/8th truggy will put on a motor. It's pretty much double the weight and at least double the inertial load on the motor going to a truggy from a rustler.

what motor would you suggest to get the most power? I am looking to stick with the 4s battery.