Quote:
Originally Posted by traxxasbasher13
I guess I hadn't ever thought about the motors bullets. I looked at them and they were almost falling off. The problem is I can't get any solder to stick to the wires. I will go to my buddy's house today or tomorrow and try one of his motors to see if it still works right.
|
Use decent 60/40 solder and flux... And a good, hot iron. The flux cleans the wire and helps the solder stick to it. I usually skip the motor to esc bullets, as most of them will eventually cause problems. The big CC bullets work well, but the smaller ones on the mm are questionable...
Threaded Mode
