What Glue for stator magnets?

[lutach]

Info on high temp resins:

-Epoxy resins top out at about 500 to 550 F. Note that higher temp epoxies can be toxic to work with

-some Phynolic resins can handle temps up tp about 900 F+- but are not available except for very large Industrail customers.

-Cermanic resins can handle temps ip to 4000F, are cheap, but are britlle

- Other published non-metalic resins typical haddle temps up to 900F, but are not available to the public

This is not from me, it's in the following website:

http://www.solarcomposites.com/compo...20sleeves.html