Big big Feigao

[MetalMan]

Guess Medusa 36-80 it is. It's just that the mount I made for the XLB readily accepts motors with 4mm screws and a 30mm bolt pattern. And Mike doesn't currently have the 36-80-1600 in stock .

Funny thing is, I'm getting a 36-80-1100 HOT in my Savage on 8s 3700. Granted it's geared for almost 50mph but still. The LT-10s ESC hardly heats up.

EDIT:
Another viable option will be the CC Neu 1520 1500 kv, when it comes out.

[BL_RV0]

Yeah, the 1520 motors would probably be best.

[lincpimp]

Originally Posted by MetalMan

Guess Medusa 36-80 it is. It's just that the mount I made for the XLB readily accepts motors with 4mm screws and a 30mm bolt pattern. And Mike doesn't currently have the 36-80-1600 in stock .

Funny thing is, I'm getting a 36-80-1100 HOT in my Savage on 8s 3700. Granted it's geared for almost 50mph but still. The LT-10s ESC hardly heats up.

EDIT:
Another viable option will be the CC Neu 1520 1500 kv, when it comes out.

How about a 1521 1y... Used of course!

[MetalMan]

Originally Posted by lincpimp

How about a 1521 1y... Used of course!

I was actually looking at that motor... But Mike didn't have any in stock. You think it's possible I will have a PM waiting for me in the next few minutes?

[lincpimp]

Originally Posted by What's_nitro?

Another shameless plug by Lincpimp.....

Actualluy I only have 1521 2y and 2.5y motors, too low kv for 8s, IMO. I plan to run the 2y in my savvy on 10s with a lt10 esc. I mainly mentioned that as i have found 1521 1y motors reasonably cheap before... No plug here. But I do not have any shame either!

Originally Posted by MetalMan

I was actually looking at that motor... But Mike didn't have any in stock. You think it's possible I will have a PM waiting for me in the next few minutes?

As above, I do not have that motor, (well I do have one but it is for the lst2)but I can look around for you!