50t slipper diff?

[superek4]

Hi Mike may I know is the slipper diff with 50t spur coming this mid month or end?I can't wait thx:)

[RC-Monster Mike]

The 50t gears are cut and headed to heat treat this week. :)

[superek4]

Originally Posted by RC-Monster Mike

The 50t gears are cut and headed to heat treat this week. :)

Hi Mike is the 50T slipper spur out yet?:)

[brushlessboy16]

Originally Posted by superek4

Hi Mike is the 50T slipper spur out yet?:)

it would show up in the shop or someone would post it.. asking it over and over doesnt get it out any faster...

[superek4]

Originally Posted by brushlessboy16

it would show up in the shop or someone would post it.. asking it over and over doesnt get it out any faster...

sorry! too excited over it, have been dreaming day n nite over it. Unless the 46 t can work for my X1 CRT?:)

[Sparky]

Originally Posted by RC-Monster Mike

The 50t gears are cut and headed to heat treat this week. :)

Mike the slipper diff works good, but I think it works alot better with 3 springs in it. With offsetting the three spring the pressure plates have more even pressure all the way aound. This is the best thing for 1/8 scale electric since the MMM.

[superek4]

Originally Posted by Sparky

Mike the slipper diff works good, but I think it works alot better with 3 springs in it. With offsetting the three spring the pressure plates have more even pressure all the way aound. This is the best thing for 1/8 scale electric since the MMM.

Hi r u using the 46t spur or d 50t?thx

[brushlessboy16]

Originally Posted by superek4

Hi r u using the 46t spur or d 50t?thx

Grammar goes a long way nowadays. There are 2 things that would lead you to the answer.... Read his signature- he is running an rc8 buggy- IT EVEN SAYS THE GEARING IS 18/46... secondly the 50t HAS NOT BEEN RELEASED!. Mike will let us know when it is release, asking other people multiple times if they are using something that has not been released yet is pointless..

[superek4]

Originally Posted by brushlessboy16

Grammar goes a long way nowadays. There are 2 things that would lead you to the answer.... Read his signature- he is running an rc8 buggy- IT EVEN SAYS THE GEARING IS 18/46... secondly the 50t HAS NOT BEEN RELEASED!. Mike will let us know when it is release, asking other people multiple times if they are using something that has not been released yet is pointless..

Sorry but mike has a 50t spur that was out of stock, mayb he got that? Anyway I was not asking if mike release the 50 diff anymore. I m ordering d 46t first:)

[RC-Monster Mike]

Originally Posted by Sparky

Mike the slipper diff works good, but I think it works alot better with 3 springs in it. With offsetting the three spring the pressure plates have more even pressure all the way aound. This is the best thing for 1/8 scale electric since the MMM.

3 springs aren't needed. There is about 150 pounds of force on the slipper by the time you simply start to flatten the two included springs and much more when you flatten them out - and there is no noticeable slip at all with this setting(flat springs). Also, adding a 3rd spring will make it quite a PITA to install the slipper-side end cap - it took quite a bit of time and research to tweak everything so it could be built without a curse-fest - the 1st 3 or 4 versions had similar spring tension, but more spring travel and was a real b!tch assemble - always fighting the spring. :)

[superek4]

cool, pls post here when it's for sale thx

[superek4]

hi Mike, I was intending to use this 50t diff wo changing my x1crt gear ratio, I calculated the speed is evsn faster, using the online speed calculation. Will it's alright can I pay u first so once the 50t is ready u can send to me for testing:)

[brushlessboy16]

pretty sure like 5 people answered this already. yes you can get it to work.

[superek4]

Originally Posted by brushlessboy16

pretty sure like 5 people answered this already. yes you can get it to work.

Thx, I will go ahead with the order:) get ready for a review in a Singapore race:)

[George16]

Where's the offroad track in Singapore? We're going to Sembawang in June.