Quote:
Originally Posted by BrianG
Yeah, it sounds like a charger issue, not the balancer. To prove this, hook up the battery straight to the charger and see if it does this.
I have a Hyperion EOS7i that does the same overvoltage error (with or without a balancer) if charging more than ~3.6A but only when the cell voltage gets to ~4.0v. Below ~3.8v, I can go to the full 7A rate of the charger.
|
I've been using the same charger (Pro Peak Prodigy 2) for months now, as long as I've owned the packs, and have never had a single overvoltage error when charging them without the balancer. I charge all those three LiPos at 5A, the maximum the charger will flow. I tried charging at a lower rate, 2A, with the balancer to try and remedy the overvoltage error, but it didn't help.
Hopefully this somewhat-off-yet-on-top discussion is helping YOU, magman.
Threaded Mode
