E-revo 6.5 novak

I have two HV Pro 6.5 systems, one in my E and one in my wifes E. They are very reliable and take alot of abuse. Personally i think that the MMM and the Novak run pretty close to each other in torque and speed with 4s LiPo. Yes I have two MMM one for me and one for my wife in our new ERBE's. Mine failed after 20 minutes and been running my E ever since. I run it against nitro's and ERBE's on our small neighborhood track. I still hold the fastest lap and best points with my good old faithful and dependable Emaxx/Novak. Course keep in mind it is a small track and the ERBE's cant really let loose with 6s. But I still love my Novak powered Emaxx.
Switch to Lipo batteries and get good ones, and youll be amazed at the difference. DO NOT run a MMM system on NiMh you will damage the batteries or the ESC or both.

[NovakTwo]

Originally Posted by Garcol

I have two HV Pro 6.5 systems, one in my E and one in my wifes E. They are very reliable and take alot of abuse. Personally i think that the MMM and the Novak run pretty close to each other in torque and speed with 4s LiPo. Yes I have two MMM one for me and one for my wife in our new ERBE's. Mine failed after 20 minutes and been running my E ever since. I run it against nitro's and ERBE's on our small neighborhood track. I still hold the fastest lap and best points with my good old faithful and dependable Emaxx/Novak. Course keep in mind it is a small track and the ERBE's cant really let loose with 6s. But I still love my Novak powered Emaxx.
Switch to Lipo batteries and get good ones, and youll be amazed at the difference. DO NOT run a MMM system on NiMh you will damage the batteries or the ESC or both.

Glad to hear that you are enjoying your Novak set-up.

[bcltoys]

Hello again can these critters be run in parallel like 2 4s packs.

I dont see why not. Just be sure your voltage is correct going into the ESC and of course be sure you have some type of low voltage control.

[NovakTwo]

Originally Posted by bcltoys

Hello again can these critters be run in parallel like 2 4s packs.

Any set-up or application questions can always be directed to tech@teamnovak.com

[lincpimp]

If you plan to use the internal bec you must run a pair of 2s packs, as the bec will over heat on more than that.

Ok, well my advice wasnt really very good.
I "think" you can jumper the non BEC side and be able to run your 4s's in parallel. But you really need to check with Novak to be sure.
Sorry about that!.

[bcltoys]

No problem with that all info is good.