RC-Monster Forums  

Go Back   RC-Monster Forums > RC-Monster Area > General Discussion

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#11)
Rivermaxx
RC-Monster Aluminum
 
Offline
Posts: 638
Join Date: Sep 2008
08.24.2009, 05:17 PM

I just talked with john @ bsr and he is going to make me some custom shoes that should be about 5" in diameter. Is going to cost me around $120. But I got to do what I got to do. Thanks for all the help. As far as the gearing I have a 36 tooth mod 1 spur with a 25 tooth pinnion. This is what I come up with this @ 3 volts which is what Nic Case told me to use on brians calc :BTW I love this calc brianG thanks! !
Differential Ratio: 2.8461538461538462 Traxxas diffs UEs are too low
Transmission Ratio: 1.7222222222222223
Other Ratio: 1
Spur Tooth Count: 36
Pinion Tooth Count: 25
Total Voltage: 18
Motor KV: 2700 neu 1.5 d
Tire Diameter (inches): 5.
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor Coil Resistance: 0.004
Spur/Pinion Ratio: 1.44 : 1
Total Ratio: 7.05846 : 1
Tire Circumference (inches): 15.71 inches (398.98 mm)
Rollout: 2.23:1
Total Motor Speed: 48600 RPM
Vehicle Speed: 102.42 mph (164.52 km/h)
Effective KV Value: 2700
KT constant: 0.5 oz-in/A
Motor Torque: Amperage not specified...
Final Torque: Amperage not specified...
Final Power: Amperage not specified...


Not sure if I want neu 1515 1.5d (above)or 1521 1d motor (below):

Differential Ratio: 2.8461538461538462
Transmission Ratio: 1.7222222222222223
Other Ratio: 1
Spur Tooth Count: 36
Pinion Tooth Count: 25
Total Voltage: 18
Motor KV: 2900 neu 1521 1d
Tire Diameter (inches): 5.
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor Coil Resistance: 0.003
Spur/Pinion Ratio: 1.44 : 1
Total Ratio: 7.05846 : 1
Tire Circumference (inches): 15.71 inches (398.98 mm)
Rollout: 2.23:1
Total Motor Speed: 52200 RPM
Vehicle Speed: 110.01 mph (176.71 km/h)
Effective KV Value: 2900
KT constant: 0.47 oz-in/A
Motor Torque: Amperage not specified...
Final Torque: Amperage not specified...
Final Power: Amperage not specified...

Which route would you guys go as far as motor? Not to mention what batteries too use for this short blast high speed run. I need to figure out a aero dynamic body and get some spare parts just in case.

Last edited by Rivermaxx; 08.24.2009 at 05:25 PM.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com