Current draw question, using eagle tree....

[Over_revO]

Thx a lot!


yeah no need to go very technical! lol haha
He used Thunder power 5000mah 40C 2X3S

He was climbing a 2 feet hill at very low speed trying to climb as slow as possible, then got partialy stuck (wheelspin...), he just did 2-3 quick WOT burst and it climbed it,

then he just climbing anoher one slightly uphill, may be 25 degree... then the esc partialy cut-out, then he appied throttle and POOF... smoke, burst of fire ...lol

So even if the amp is very low when going low speed, it can smoke the esc if geared too
wide?

if the savage have peak of 189 amp, , how can i know if it is not overgeared?
the motor never get hot...

On my truggy the motor is between 145-155F all the time, with spikes at 170 amp.

I know the savage will wheelie when too much throttle is applied and the truggy will have more constant load , but isi it teh main reason it overheat?

thx for any tips, appreciated :)

Mike