hungry truggy

[its me]

Originally Posted by kneedeeppow

any ideas on how to stop my rcm pinions from getting eaten? motor and mount are solid(not loose) they pinion is meshed up nicely against the spur.i ran my 14t for 4 battery cycles and no problems.then today it got eaten along with a 15t pinion of mine on loan to another brushless truggy(this one completly stripped all the teeth)

What does your spur look like? Im not necessarily looking at the missing tooth but the wear in the center of the gear, ill go out on limb and say that your pinnions are a softer steel then your spur.

I would give Robinson Racing a try, I have so far never been let down by there hardened steel.



this is my experience with pinions that were softer then the spurs.

[kneedeeppow]

Originally Posted by its me

What does your spur look like? Im not necessarily looking at the missing tooth but the wear in the center of the gear, ill go out on limb and say that your pinnions are a softer steel then your spur.

I would give Robinson Racing a try, I have so far never been let down by there hardened steel.



this is my experience with pinions that were softer then the spurs.

the spur looks fine.i was under the impression the rcmonster pinions were super strong.goes to show how much power these brushless systems are punching out. i havent had any major crashes so far.just been flyin around open sports fields and a cautious day racing.by cautious i mean 1/4 throttle and barely hanging on

[its me]

Originally Posted by kneedeeppow

the spur looks fine.i was under the impression the rcmonster pinions were super strong.goes to show how much power these brushless systems are punching out. i havent had any major crashes so far.just been flyin around open sports fields and a cautious day racing.by cautious i mean 1/4 throttle and barely hanging on

Id give the robinson racing one a shot, I have never been disappointing by there gears. As you can see my spur in my pic is also in perfect condition yet it tore up the 2 speed bell..

When filed I found out the bell was a softer steel then the spur.

[kneedeeppow]

Originally Posted by its me

Id give the robinson racing one a shot, I have never been disappointing by there gears. As you can see my spur in my pic is also in perfect condition yet it tore up the 2 speed bell..

When filed I found out the bell was a softer steel then the spur.

do you have a link for the robinson racing pinions?

[its me]

Originally Posted by kneedeeppow

do you have a link for the robinson racing pinions?

Here you go

http://www.impaktrc.com/index.php?cP...sort=3a&page=3

[kneedeeppow]

Originally Posted by its me

Here you go

http://www.impaktrc.com/index.php?cP...sort=3a&page=3

many thanks