Speed Calculator

[Jabe]

Could you add these tires?

Proline 2.2" rim Sand Paw 93.5mm/3.68" (with claws 108mm/4.25", http://www2.gpmd.com/imagel/p/lproc1052.jpg)
Traxxas Talon 1/16 82.3mm/3.24"

Could you add Tekin T8 motors on that list?

[BrianG]

Small update:

- Added the tires and Tekin motors.
- Fixed a small bug in the data tables page.
- Added a rollout ratio solver page. This is mainly for me for a future project.

[redshift]

Brian, please add Losi Zombie Max, 3.2 (T/Emaxx), at 5.8" dia.

Originally Posted by drkdgglr

Losi XXL gearing:

the output gears in the xxl tranmisssion have a 29/16 ratio
2nd gear xxl foc: 22/23*29/16 = 1,894886364
2nd gear xxl foc & swap mod: 23/22*29/16 = 1,733695652

so swapping to xxl output gears in the lst2/afershock tranny(1,89) gives almost the same reduction as the gear swap mod in the lst2 tranny(1,91)

Brian,
I see you've added these, but in the wrong order. The 'XXL 2nd gear FOC' has the 'XXL 2nd gear FOC swap mod' ratios and vv.

[Unsullied_Spy]

Do you have measurements for the XXL tires? I've been putting in 7" for my gearing calculations but it would be nice to have an accurate measurement.

I don't know what the xxl's tire measurements are. Can't find them anywhere on the internet and I don't have them myself. I only have the losi sand tires and my guess is they're about 6.3" - 6.4".

[Bondonutz]

XXL tires are the same as the ATX's at 6.75"

[BrianG]

Another update:

- Fixed image URL in the battery resistance demo causing it to not display in FireFox.
- Added copyright info at the bottom of the pages.
- Added LED Calculator page (in Electrical category).
- Added Losi XXL and ZombieMax tires.
- Fixed error with "XXL 2nd gear FOC" and "XXL 2nd gear FOC swap mod" being reversed.

[brushlessboy16]

did you plan on adding the new castle motors?

[Bondonutz]

Thank You Brian, FYI the XXL tires are the exact same ones that come w/the LST2 and are called "ATX's" .

[BrianG]

Originally Posted by brushlessboy16

did you plan on adding the new castle motors?

The request was not posted.

Originally Posted by Bondonutz

Thank You Brian, FYI the XXL tires are the exact same ones that come w/the LST2 and are called "ATX's" .

You know, I go through the posts requesting changes/additions and write them down so I know what my task list is. I actually did write that down and still forgot to do it.

[Bondonutz]

Originally Posted by BrianG

You know, I go through the posts requesting changes/additions and write them down so I know what my task list is. I actually did write that down and still forgot to do it.

Your Fired, pack your shizz and get the flock out.

[BrianG]

The term "you're fired" would imply I receive a steady paycheck. So instead of gathering my "shizz" and leaving with my tail between my legs, I shall swagger out in a huff.

[Bondonutz]

I'll tell you what, I've decided to let it slide just this once. Get back to work.

Thanks for all you do and supplying the Calc MrB !

[whitrzac]

would it be posible to start a "master spring chart" that includes EVERY spring made???

it would take a looong time, but once its done it would save loads of time


just to make it easyer on you, I think RCM users should be able to make changes/add springs without emailing you the specs

organize by TC size, 1/10 truck/buggy, 1/8 buggy, and 1/8 truggy, and oddball(revo, etc)

needed specs for springs

lb/in and metric
lenght IN and MM
brand
diamiter