A Ballistic 550 would be the same size as the HV Pro motors, but feature the 14mm tuning rotor, which provides a higher temperature threshold. (And, of course, the re-buildability.)
The street price would probably be @125.00. As I posted elsewhere, installing this rotor decreases the published Kv of our existing motors by @20%.
E.G: our current 7.5T motor is rated at 3000Kv, so a 7.5T Ballistic 550 would be 2400 Kv. We may want to send out a few prototypes for users to test test with the Tekins/MMP sensored escs and provide some feedback.
Quote:
Originally Posted by E-Revonut
Currently I have no use for one but perhaps in the spring. What would the difference be between a 550 ballistic and an hv motor? My idea is to keep my E-maxx stock and waterproof through the winter but in the spring I was planning on a MMP running a HV 6.5 motor. The computer adjustability and CS I beleive make the MMP a better esc choice. My first large scale brushless system was an HV Maxx 4.5, power was good but the esc couldn't keep up. So if a 550 sizedballistic motor would offer mean advantage over an hv motor I'm all for it, if the price is right
|
Threaded Mode
