Another Erevo 5B !!!

[Helly]

Another HomemadeErevo 5b!
this one is made with two E-revo chassis and two T6 aluminium plate, i have added the 5b bumper and all body mount of the baja.
He is not finish yet, but seems to be very strengh!

I ll soon test it with a 1515 Neu motor and 7s2pA123, I hope it will work!

Now pics:








Helly

[brushlessboy16]

NICe!!!

[V0RT3X]

Savage 5T wheels?

[bruce750i]

Nice job Helly thats sweet! That drive shaft is huge! Is it a tail boom off of a heli or something else?

[Popoxx]

Looks good congrats !

The rear center driveshaft is huge ! Did you make it yourself ?
You won't use a skid to protect it ?

[hyper9e]

oh too cool...

[JThiessen]

Drive shaft looks like a piece of al tube pressed over the stock revo shafts.

They look like 5B rims, but that also looks like traxxas 17mm hubs - 5B has a 23mm hub I believe.

[brushlessboy16]

Originally Posted by JThiessen

Drive shaft looks like a piece of al tube pressed over the stock revo shafts.

They look like 5B rims, but that also looks like traxxas 17mm hubs - 5B has a 23mm hub I believe.

Traxxas hubs have the spline, and 5b's use a 24mm hub, either way its something custom

[JThiessen]

Originally Posted by brushlessboy16

Traxxas hubs have the spline, and 5b's use a 24mm hub, either way its something custom

Ah - they do have the spline on them dont they. Yeah, that 23 was supposed to be 24.....

[Overdriven]

Nice job. I gotta post some pics of my Revo-5b. Made some changes, started on the cage since it was last seen.

I'm wondering about the 24mm hexes as well. More info please?

[suicideneil]

Just one small note:-

B = buggy
T = truggy

Looks good though, rather huge

[brushlessboy16]

Originally Posted by JThiessen

Ah - they do have the spline on them dont they. Yeah, that 23 was supposed to be 24.....

I see no spines on the hubs

[Helly]

Thanks all for your interest!

To suicideneil: you right, it's a 5T

The rear center driveshaft is huge ! Did you make it yourself ?
You won't use a skid to protect it ?

Yes it's a homemade driveshaft with juste a aluminium tube between classic revo shaft and two screw to hold them...

for the hub, i forget to add this pic: (it's just 23mm hub with around 0.4mm plate to add the extra 1mm!

[JThiessen]

Originally Posted by brushlessboy16

I see no spines on the hubs

I meant on the traxxas version - not these...

[Helly]

It seems to work very well!!! lool

Neu 1515 2D with 7s2p A123 batterys... tone of power!!
temp motor: ~120-140°
temp mamba: don't really know but the fan never turn!

Ok we are in winter, but it seems really performant!

I have juste some probleme with the front shock oil... front shock really have hard time... (8kg for the complete beast)