MMM Switch Replacement?

[Pdelcast]

Originally Posted by fastbaja5b

How hard would it be to put in a decent switch, even a basic receiver switch would wire in fairly easily and certainly last a lot longer.

Wow, that's pretty harsh -- FORMER castle customer, and you feel so strongly about it that you have to put it in your sig??? Why?

We recently changed to another switch manufacturer, and think the new switch will be a better choice in the long run.

We are limited to a particular size and shape of switch by our OEMs. So, we have been looking for a better quality switch almost since day one. The original switch we used was made by a Japanese company, and had reliability problems (we assumed the Japanese switch would be fairly good quality -- but the consistency of quality was poor.)

We then switched to another vendor, but the switch was only marginally better.

We are now using a new switch manufacturer, after a lot of testing, beating, soaking, etc.

When we first started building the Mamba Max (about six years ago) we initially released it with a fairly beefy toggle. We were the target of ENDLESS complaints about the switch.

We then switched to a slide (the same we use on the Monster...) and pretty much the complaints stopped. We still got the occasional complaint, but everyone was pretty happy with it.

Now, the SAME SWITCH on the Monster has generated a lot of negative comments, so we have been working constantly to find better, more rugged switches.

But still, everyone complains, and just assumes we don't care. /sigh

We try hard to make a product that works for everyone. Sometimes we miss the target - - and sometimes we just screw up. But don't just assume that we don't care. We are constantly working to improve our products, and bring people a better and better product.

Patrick

Originally Posted by Pdelcast

Wow, that's pretty harsh -- FORMER castle customer, and you feel so strongly about it that you have to put it in your sig??? Why?

We recently changed to another switch manufacturer, and think the new switch will be a better choice in the long run.

We are limited to a particular size and shape of switch by our OEMs. So, we have been looking for a better quality switch almost since day one. The original switch we used was made by a Japanese company, and had reliability problems (we assumed the Japanese switch would be fairly good quality -- but the consistency of quality was poor.)

We then switched to another vendor, but the switch was only marginally better.

We are now using a new switch manufacturer, after a lot of testing, beating, soaking, etc.

When we first started building the Mamba Max (about six years ago) we initially released it with a fairly beefy toggle. We were the target of ENDLESS complaints about the switch.

We then switched to a slide (the same we use on the Monster...) and pretty much the complaints stopped. We still got the occasional complaint, but everyone was pretty happy with it.

Now, the SAME SWITCH on the Monster has generated a lot of negative comments, so we have been working constantly to find better, more rugged switches.

But still, everyone complains, and just assumes we don't care. /sigh

We try hard to make a product that works for everyone. Sometimes we miss the target - - and sometimes we just screw up. But don't just assume that we don't care. We are constantly working to improve our products, and bring people a better and better product.

Patrick

Why don't you spend 1 dollar more per switch and buy a descent "Made in Germany/USA/Europe/whatever" and not an cheap Chinese/Japanese/Taiwanese switch? I think they are better than Japanese, Chinese and Taiwanese switches, as most products which aren't made in China/Japan/Taiwan. Of course there's also crap made by USA/German/Europe company's, but the product mostly is cheap then too.
Hope you understand what I'm trying to say, as my English isn't the best.

I know that you have to save as much money as possible on the ESC's as you want to make profit of course, but paying 1 dollar more for a switch can't be a big problem?

I'm not trying to bash Castle Creations, I'm not a fan of your products neither a hater, just Neutral :)

[Pdelcast]

Originally Posted by Byte

Why don't you spend 1 dollar more per switch and buy a descent "Made in Germany/USA/Europe/whatever" and not an cheap Chinese/Japanese/Taiwanese switch? I think they are better than Japanese, Chinese and Taiwanese switches, as most products which aren't made in China/Japan/Taiwan. Of course there's also crap made by USA/German/Europe company's, but the product mostly is cheap then too.
Hope you understand what I'm trying to say, as my English isn't the best.

I know that you have to save as much money as possible on the ESC's as you want to make profit of course, but paying 1 dollar more for a switch can't be a big problem?

I'm not trying to bash Castle Creations, I'm not a fan of your products neither a hater, just Neutral :)

Well, because there aren't any made in USA/Germany/Europe switches that are readily available, and cost less than about $15-$20 each...

If you can find one -- please let me know. I've had several distys looking for quite a while...

The switch we are buying now is made by a US company, but in China....

Seems all of the production lines were packed up, and moved lock stock and barrel to China.

Patrick

[georgec]

Hello Patrick
I hope you don't think I was in anyway trying to run down Castle products. Quite the opposite I have found your products to be the standard in RC. I only want a new switch.

[Pdelcast]

Originally Posted by georgec

Hello Patrick
I hope you don't think I was in anyway trying to run down Castle products. Quite the opposite I have found your products to be the standard in RC. I only want a new switch.

I agree. I think our new switch is very good-- it's certainly much better than the previous switch.

Originally Posted by Pdelcast

Well, because there aren't any made in USA/Germany/Europe switches that are readily available, and cost less than about $15-$20 each...

If you can find one -- please let me know. I've had several distys looking for quite a while...

The switch we are buying now is made by a US company, but in China....

Seems all of the production lines were packed up, and moved lock stock and barrel to China.

Patrick

I don't get why a switch, yes, just a switch, just a connection between a + and a - wire cost $20? That's just sick imo, or are they made of gold?

Can't help you with that. I don't know which switches are good enough, and I definitely don't know somewhere to buy them in huge quantities. Never had any problems with switches anyway.

Still in China... Many products which are made in China are good. (CC has all their products made in China right? For example your CC/NEU 2200kv, made in China, but it's a very nice brushless motor) But IMO things which are made in USA/Europe etc. are (mostly) of better quality, less nice about it is that they cost 5 times as much as in China.


I can't get it out of my mind why it's so hard to make a good switch lol