Losi Ten-T Conversion

[hootie7159]

Can't wait to give the other 10th scalers some brushless a$$ kicking!





found these 17mm adapters in my random parts box that fit the ten-t's axles perfectly....just needed some washers to keep the wheels from backing out.....and..these adapters should fit as well

http://www.amainhobbies.com/product_...-T-Maxx-Blue-4

the ID is 6mm but the pin that comes with it is 3mm...you can either drill out the ten-t's axle or use the ten-t's axle pin (its 2.5mm)

[bryan]

Originally Posted by hootie7159

Can't wait to give the other 10th scalers some brushless a$$ kicking!

Attachment 8732

Attachment 8733

found these 17mm adapters in my random parts box that fit the ten-t's axles perfectly....just needed some washers to keep the wheels from backing out.....and..these adapters should fit as well

http://www.amainhobbies.com/product_...-T-Maxx-Blue-4

the ID is 6mm but the pin that comes with it is 3mm...you can either drill out the ten-t's axle or use the ten-t's axle pin (its 2.5mm)

Ditch the nitrotane/ross sticker.Thats the first thing i did.Like that wheel package!

[bryan]

So anyway back to buisness.What do ya think about castles neu line up for this dismantled incomplete rolling chassis."1512-1518" obviously 1800kv flavor.4s or 5s-ish?