My MMv3 is back, thank you Castle, BUT IT DOESN'T WORK ! :(

[nuz69]

.... ^^ Obviously lol, in fact to go to the calibration, the Mamba Monster ESC need to count the cell and then start calibration. I tried dozen times it, the ESC just lock itself on its green yellow flashing sequence. Anyway it's isn't normal that it turns ON alone...

[maneba]

Originally Posted by nuz69

.... ^^ Obviously lol, in fact to go to the calibration, the Mamba Monster ESC need to count the cell and then start calibration. I tried dozen times it, the ESC just lock itself on its green yellow flashing sequence. Anyway it's isn't normal that it turns ON alone...

Once happened to me, but i've put the esc connector in the wrong position in the rx. Positive instead of negative.

[nuz69]

it is not my case too :( The RX works perfectly, my steering servo works. I doubled check this too, there is no way to invert negative and positive in my RX connection... Seems I will have to send it back to Castle .

[Thomas Porfert]

Nuz,

If you've received a repair and it doesn't work, please contact us in tech support. We will get a replacement sent directly to you and get you taken care of. If you're in the US we'll send it with a prepaid mailer so you can send the defective unit back. If you're outside the US, you'll need to send it in to us, but we'll cross ship it so we can get to you faster. Please shoot me an e-mail at thomas (at) castlecreations (dot) com.

We are currently out of stock on the Monster's but we're expecting more soon. Please let me know if you have any questions or concerns.

Thomas Porfert
Castle Tech Support

[nuz69]

Hello Thomas,
Email sent, thanks for the fast answer.
Regards.
Nuz.